CCNA Networking
CCNA networking is the Certified network associate training by Cisco gives you full scope to grow as a network engineering professional. Enroll today in this object oriented training.

Cisco Certified Network Associate Training
Training Modules

Introduction To Network Fundamentals
LAN Switching Technology
Routing Technology
Infrastructure Services
Infrastructure and Security Fundamentals
Automation & Programmability

1.0  Introduction to Network Fundamentals

1.1  Explain the role and function of network components

Routers
L2 and L3 switches
Next-generation firewalls and IPS
Access points
Controllers (Cisco DNA Center and WLC)
Endpoints
Servers

1.2  Describe characteristics of network topology architectures

2 tier
3 tier
Spine-leaf
WAN
Small office/home office (SOHO)
On-premises and cloud

1.3  Compare physical interface and cabling types
Single-mode fiber, multimode fiber, copper
Connections (Ethernet shared media and point-to-point)
Concepts of PoE
Identify interface and cable issues (collisions, errors, mismatch duplex, and/or speed)
Compare TCP to UDP
Configure and verify IPv4 addressing and sub-netting
Describe the need for private IPv4 addressing
Configure and verify IPv6 addressing and prefix
20%  

2.0  LAN Switching Technology
2.1   Configure and verify VLANs (normal range) spanning multiple switches

Access ports (data and voice)
Default VLAN
Connectivity
2.2   Configure and verify Inter-switch connectivity

Trunk ports
1Q
Native VLAN
Configure and verify Layer 2 discovery protocols (Cisco Discovery Protocol and LLDP)
Configure and verify (Layer 2/Layer 3) Ether-Channel (LACP)
Describe the need for and basic operations of Rapid PVST+ Spanning Tree Protocol and identify basic operations
Root port, root bridge (primary/secondary), and other port names
Port states (forwarding/blocking)
Port-Fast benefits
2.6  Compare Cisco Wireless Architectures and AP modes
2.7  Describe physical infrastructure connections of WLAN components (AP, WLC, access/trunk ports, and LAG)
2.8 Describe AP and WLC management access connections (Telnet, SSH, HTTP, HTTPS, console, and TACACS+/RADIUS)

3.0 Routing Technology:

Interpret the components of routing table
3.1.a  Routing protocol code
3.1.b  Prefix
3.1.c  Network mask
3.1.d  Next hop
3.1.e  Administrative distance
3.1.f     Metric
3.1.g  Gateway of last resort

3.2  Determine how a router makes a forwarding decision by default 
3.2.a  Longest match
3.2.b  Administrative distance
3.2.c  Routing protocol metric

3.3  Configure and verify IPv4 and IPv6 static routing
3.3.a  Default route
3.3.b  Network route
3.3.c  Host route
3.3.d  Floating static

3.4 Configure and verify single area OSPFv2 
3.4.a  Neighbor adjacencies
3.4.b  Point-to-point
3.4.c  Broadcast (DR/BDR selection)
3.4.d  Router ID

3.5 Describe the purpose of first hop redundancy protocol

4.0 Infrastructure Services
4.1 Configure and verify inside source NAT using static and pools
4.2 Configure and verify NTP operating in a client and server mode
4.3 Explain the role of DHCP and DNS within the network
4.4 Explain the function of SNMP in network operations
4.5 Describe the use of syslog features including facilities and levels
4.6 Configure and verify DHCP client and relay
4.7 Configure network devices for remote access using SSH

5.0 Infrastructure and Security Fundamentals

5.1 Define key security concepts (threats, vulnerabilities, exploits, and mitigation techniques)
5.2 Describe security program elements (user awareness, training, and physical access
control)
5.3 Configure device access control using local passwords
5.4 Describe security password policies elements, such as management, complexity, and
password alternatives (multifactor authentication, certificates, and biometrics)
5.5 Describe remote access and site-to-site VPNs
5.6 Configure and verify access control lists
5.7 Configure Layer 2 security features (DHCP snooping, dynamic ARP inspection, and port
security)
5.8 Differentiate authentication, authorization, and accounting concepts
5.9 Describe wireless security protocols (WPA, WPA2, and WPA3)

5.10 Configure WLAN using WPA2 PSK using the GUI

10% 6.0 Automation and Programmability

6.1 Explain how automation impacts network management
6.2 Compare traditional networks with controller-based networking
6.3 Describe controller-based and software defined architectures (overlay, underlay, and
fabric)
6.3.a Separation of control plane and data plane
6.3.b North-bound and south-bound APIs

6.4 Compare traditional campus device management with Cisco DNA Center enabled device
management

6.5 Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding)

6.6 Recognize the capabilities of configuration management mechanisms Puppet, Chef, and
Ansible

6.7 Interpret JSON encoded data